Information Request Form
Manifold
- Part Number: ELC-C76
- Two-way aluminium casing
- Low pressure gauge 17 bar
- High pressure gauge 34 bar
- Practical spherical valves
Low – High Pressure Ports
- Part Number: ELC-S21 / ELC-S22
- Suitable for Opel vehicles
Charging Adapters R1234yf
- Part Number: ELC-C130M / ELC-C130K
- Suitable for R1234yf
- Fast and easy charging
Charging Adapters R134a
- Part Number: ELC-C18M / ELC-C17K
- Suitable for R134a
- Fast and easy charging
- Chrome plating, high quality
Filter (Orifice Set)
- Part Number: ELC-A45
- 15 different types, a total of 29 orifices
- Chrysler, Ford, GM, Volvo
- 1 removal apparatus
- 10 spare green o-rings
Flat O-ring Set
- Part Number: ELC-C103
- 25 pieces
A/C Washer Kit
- Part Number: ELC-C102
- 35 pieces
HNBR O-ring Set
- Part Number: ELC-C34
- 240 pieces
Universal Valve Core & Tool Box Kit
- Part Number: ELC-A23
- 66 pieces
Infrared Thermometer
- Part Number: ELC-S23
- Operating temperature -32°C to 350°C
- Accuracy ±1.5°C
- Distance spot ratio 12:1
- Response time 500 ms
- Resolution 0.1°C
- Wavelength 8-14μm
- Dimensions 153*101*43 mm
- Weight 147.5 gr
- Power 9V battery
- °C/°F mode
- Auto data hold
- Auto power off
- High/low alarm
Hydraulic Hose Crimper Kit
- Part Number: ELC-S17
- Easy to use, portable
- 5/16″, 13/32″, 1/2″, 5/8″
Compressor Removal Kit
- Part Number: ELC-S25
- Long lasting, high quality
- GM R4, A6, HR-6, DA-6, V5
- SANDEN SD505, 507, 508, 510, 575, 708, 709
A/C Fuel Lines Quick Disconnect Tool
- Part Number: ELC-S28
- Disconnect tool designed to fit quick-connect fuel line fasteners
- Works on various vehicles and separate fuel lines without damaging the connectors.
- 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″
Universal A/C Clutch Holding Tool
- Part Number: ELC-S27
- Hold compressor clutch plate for retaining nut remove & installation
Spring Lock Coupling Tool Set
- Part Number: ELC-S20
- Used for separating spring lock A/C couplings
Filter Drier
- Part Number: ELC-C05
- Much higher water absorption capacity compared to equivalent series
- High acid absorption capacity
- Better gas refining due to filtering in stages
- Operating temperature -45°C to 75°C
- Maximum operating pressure 46 bar
- Low fluid resistance
- 1/4″, 5/16″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″
Drier filters are specially produced for A/C recovery, recycle, recharge machines to make recovered refrigerant usable again. ELC302 series drier filters use desiccant 80% molecular sieve and 20% activated alumina thus highly increasing its capacity to absorb moisture and acid. Compatible with both new (HFC) and old (CFC, HCFC) refrigerants and their oils.
