Cleaning & maintenance · Consumables

A/C odour-removing disinfectants

A/C odour comes from bacteria and mould combining with moisture on the evaporator. CleanEvap removes the dirt and microorganisms, AC Odor Shield prevents regrowth for a year, Puratise disinfects the cabin air in 15 minutes; none of them requires removing the evaporator.

  • 1 yearAC Odor Shield protection period
  • 15 minPuratise application time
  • 0 VOCCleanEvap: no solvents or acids
  • Genuine AirSept and Puratise products
  • Applied without disassembly
  • Non-toxic, biodegradable formulas
  • Complete hygiene together with the ozone generator

The cause of the odour

The odour comes from the evaporator

While the A/C runs, microorganisms from the outside air are drawn onto the evaporator; when it switches off, the moisture left on the cold surfaces combines with them. A warm, dark and damp environment is the ideal home for bacteria and mould.

  • Why does it happen?

    As the evaporator surface gets dirtier, the odour grows and airflow drops; the air entering the cabin carries the bacteria from the dirty surface with it.

  • How do you get rid of it?

    Ideally you would remove the evaporator, but that is expensive and time-consuming. Flushing with CleanEvap gives the same result without disassembly.

  • How do you prevent it?

    AC Odor Shield is applied to the cleaned evaporator: the antimicrobial, moisture-repelling coating keeps odour away for a year.

Products

Disinfectants and cleaners

Evaporator cleaning and protection

ELC‑A01Cleaner

AirSept CleanEvap

Fast-acting evaporator cleaner that cleans the A/C system without removing components. Removes dust, dirt, oil and other odour-causing contaminants.

  • No solvents, acids or caustics; zero VOC
  • Non-abrasive; safe on plastic, metal and rubber
  • Biodegradable, non-toxic
  • Removes mould and bacteria without harming people or the environment
ELC‑A021-year protection

AirSept AC Odor Shield

Applied to the cleaned evaporator; its powerful antimicrobial, moisture-repelling acrylic coating prevents pollen, sludge and mould build-up for a year.

  • Remove the cabin filter and spray into the filter housing
  • Dry for 10 minutes using the vehicle's heater
  • Moisture runs off in droplets instead of clinging to the surface
  • Formulated to stay effective for one year

Cabin disinfection

ELC‑A46250 ml

Puratise A/C cleaner

Dry-formula cabin and A/C disinfectant containing an antimicrobial agent proven in hospitals and food businesses; leaves a clean, fresh scent in the vehicle.

  • One can empties in about 15 minutes; for best results leave the vehicle closed overnight
  • Dry product: leaves no moisture or stains on upholstery
  • Non-toxic, CFC-free; made in the United Kingdom
  • Proven effective against viruses, bacteria and fungi

Application

Odour-free A/C in three steps

The sequence for getting rid of A/C odour for good: clean, dry, protect. Puratise is applied separately for cabin disinfection.

  1. 01Flush with CleanEvap

    The evaporator is flushed with CleanEvap solution without removal; caked-on dirt, mould and bacteria are stripped away.

  2. 02Dry

    Run the system to dry the evaporator; no moisture remains.

  3. 03Apply AC Odor Shield

    Remove the cabin filter, spray into the filter housing, dry with the heater for 10 minutes. One year of protection.

  4. 04Disinfect the cabin with Puratise

    The can empties inside the vehicle in 15 minutes; applied with the A/C running, it also cleans the system air.

Frequently Asked Questions

Questions about use and selection

Is an odour-removing spray enough on its own?

A spray masks the odour for a short time; if the source is microorganisms on the evaporator, it comes back. The lasting fix is to clean with CleanEvap and protect with AC Odor Shield.

How often should it be applied?

AC Odor Shield stays effective for a year; we recommend renewing it at each annual A/C service. Puratise can be reapplied whenever odour or hygiene requires it.

How is it different from the ozone generator?

Ozone destroys odour molecules and microorganisms in the cabin air and on surfaces without chemicals; CleanEvap removes the physical dirt on the evaporator surface. For a lasting result the two are used together.

How can I get a quote for bulk orders and dealership?

Sayfadaki teklif formunu doldurun ya da bizi arayın; adet ve teslimat şehrine göre aynı iş günü içinde fiyat veririz. Bayilerimiz için ayrı B2B portalı ve fiyat listesi vardır.

Yes. The unit is installed on site, the scales and vacuum are calibrated, and your technicians receive user training. The user manual and training videos are also available on our YouTube channel.

Quote

Get a quote for disinfectants

Tell us briefly what you need; we will send the right configuration, lead time and any current offers within the same business day.

Get a Quote

A/C Disinfectants · reply within the same business day

* Fields marked * are required.