Cleaning & Maintenance

RTC 3S

The solution for heater cores clogged with scale, rust and sludge, without removing the dashboard.

Connected with two hoses, the microprocessor completes the flush with heating, flow reversal and filtration, without user intervention. Heating and cooling performance is restored.

Radiator and heater core

Made in Türkiye
2-year warrantyDirect from the manufacturer
Technical support
User trainingInstallation and training included
  • 15 L316L stainless steel tank
  • 2500 Wpowerful water heater
  • 35 L/min0.5 HP water pump
  • 5"TFT HMI touchscreen
  • 40 kgcompact housing on wheels
  • 0parts removed: the dashboard stays in place

Who it's for

For every vehicle with a clogged heater core

A clogged heater core is a common problem in older vehicles: flow drops, heating weakens, the engine overheats. Removing the core is expensive and time-consuming; the RTC 3S flushes it in place.

  • Auto electricians and heating specialists

    Solve pre-winter heating complaints in half a day, with no removal and refitting.

  • Radiator shops

    Flush the radiator, engine block and coolant passages with one machine; filter out dirt, rust and swarf.

  • Fleet and taxi maintenance workshops

    Prevent overheating failures in high-mileage vehicles with periodic cooling system cleaning.

Key features

Service without removing the dashboard

Effective cleaning

Flushes the entire heating and cooling circuit, including the radiator, engine block and coolant passages.

Smart control

Microprocessor and 5" TFT HMI display; adjustable flushing time, automatic programme end.

Automatic functions

Heating, filter life monitoring, full-tank and low-water warnings, automatic stop in case of a leak.

Powerful performance

Fast heating with a 2500 W heater and high-pressure 316L tank; 35 L/min flow with the 0.5 HP pump.

Tracking and reporting

Flushing time, number of vehicles serviced and filter life are tracked on the unit.

Blockage warning

A blocked radiator is detected and monitored via the pressure gauge.

Easy flow reversal

The 4-way valve reverses the water flow, clearing the blockage from both directions.

Dual filter system

Dirt, rust and particles are filtered out; electronic filter life monitoring and pump maintenance warning.

How it works

Two hoses, one programme

The operator connects two hoses; the microprocessor runs the heating, flushing, flow reversal and filtration steps without user intervention. Flush Clean 500 ml is used mixed with 8–10 L of water.

  1. 01Connection (two hoses)
  2. 02Heating
  3. 03Flushing
  4. 04Flow reversal
  5. 05Filtration and rinsing
  • 2500 Wheater; heats up faster with the special high-pressure tank
  • 35 L/minpump flow rate
  • 8–12 Lselectable water capacity

Specifications

RTC 3S in numbers

Tank15 L, 316L stainless steel
Heater power2500 W
Water pump0.5 HP, 35 L/min
Display5" TFT HMI touchscreen
Water capacity options8 – 12 L
FilterDual filter, electronic life monitoring
Power220 V ±%10 / 50 Hz
Dimensions (W × D × H)55 × 52 × 105 cm
Weight40 kg
Packaging dimensions61 × 58 × 111 cm
Cleaning fluidFlush Clean 500 ml (with 8–10 L of water)
CertificationCE · ISO 9001 manufacturing

Frequently Asked Questions

What people ask before buying

Which vehicles is it used on?

On all passenger cars and light commercial vehicles; for the radiator, heater core, engine block and coolant passages. It connects with two hoses; neither the dashboard nor the core is removed.

Which cleaning fluid is used?

Flush Clean 500 ml, mixed with 8–10 L of water, is effective only when used with the RTC; it dissolves scale, rust, swarf and sludge without harming sensitive metals, and its inhibitors protect metal and rubber parts.

How long does a flush take?

The time is adjustable; the programme can be repeated depending on the degree of blockage. The unit tracks the time and stops automatically when the programme ends.

How do warranty and service work?

Recharging units carry a 2-year manufacturer's warranty. On-site service is provided across Türkiye within 24–48 hours; labour after a repair is covered by an additional 6-month warranty. Service is provided by the team that designed and built the unit. For a fault under warranty the process has four steps: notification and registration, assessment, repair, testing and delivery; details are on the technical service page. on the technical service page.

Yes. The unit is installed on site, the scales and vacuum are calibrated, and your technicians receive user training. The user manual and training videos are also available on our YouTube channel.

Quote

Get a price and lead time for the RTC 3S

Tell us briefly what you need; we will send the right configuration, lead time and any current offers within the same business day.

Get a Quote

RTC 3S · reply within the same business day

* Fields marked * are required.